All Categories
|
> UCC 2020 SANY STC550T5 50 Tons 5 Section Used Truck Crane Machinery EquipmentUCC 2020 SANY STC550T5 50 Tons 5 Section Used Truck Crane Machinery Equipment Superior Lifting Capacity Five-section U-shaped main boom with a large cross-section, with a fully extended boom length of 46m; a transverse outrigger span of 7.4m and a total counterweight of 10.5t, resulting in superior lifting performance. Super Strong Chassis Performance A brand-new chassis with a width of 2.8m, a raised and widened rectangular-section frame, which fully enhances the torsion and bending resistance during lifting; equipped with a 375-horsepower engine, a 10-speed transmission with a synchronizer, and heavy-duty axles; G-class chassis, with superior passing performance, a maximum climbing gradient of 47%, and a fuel consumption of 40L per 100km*. Constant-speed economic fuel consumption A newly developed dual-pump intelligent flow system, with independent luffing and combined boom extension, improving the controllability of compound actions by more than 50%. Efficient and Energy-Saving Hydraulic System Equipped with imported oil pumps and hoisting motors, meeting the needs of precision lifting: the minimum stable slewing speed is 0.15°/s, and the minimum stable hoisting speed is 1.5m/min. Compared with the hydraulic control system, the electronic control system achieves a comprehensive energy saving of 15% for upper vehicle lifting and a 30% improvement in heavy-load operation efficiency. Tire Name Plate Wire Rope Hoist Cab
| Product name : | UCC 2020 SANY STC550T5 50 Tons 5 Section Used Truck Crane Machinery Equipment |
UCC SANY 2019 STC550T5 55 Tons 5 Section Used Truck Crane Superior Lifting Capacity Five-section U-shaped main boom with a large cross-section, with a fully extended boom length of 46m; a transverse outrigger span of 7.4m and a total counterweight of 10.5t, resulting in superior lifting performance. Super Strong Chassis Performance A brand-new chassis with a width of 2.8m, a raised and widened rectangular-section frame, which fully enhances the torsion and bending resistance during lifting; equipped with a 375-horsepower engine, a 10-speed transmission with a synchronizer, and heavy-duty axles; G-class chassis, with superior passing performance, a maximum climbing gradient of 47%, and a fuel consumption of 40L per 100km*. Constant-speed economic fuel consumption Efficient and Energy-Saving Hydraulic System A newly developed dual-pump intelligent flow system, with independent luffing and combined boom extension, improving the controllability of compound actions by more than 50%. Equipped with imported oil pumps and hoisting motors, meeting the needs of precision lifting: the minimum stable slewing speed is 0.15°/s, and the minimum stable hoisting speed is 1.5m/min. Compared with the hydraulic control system, the electronic control system achieves a comprehensive energy saving of 15% for upper vehicle lifting and a 30% improvement in heavy-load operation efficiency. Work Hours Load chart Name Plate Cab
US$ 1
UCC SANY 2020 STC550T6 Used Truck Crane Machinery Lifting Services Superior Lifting Capacity Six-section main boom with a large cross-section and oval shape. The fully extended length of the main boom is 52m, the maximum lifting height is 68m, and it has an excellent lifting height capacity at the 80t class. With a transverse outrigger span of 7.4m and a counterweight of 10.5t, its lifting performance leads the industry by more than 20%. Super Strong Chassis Performance A brand-new chassis with a width of 2.8m, equipped with a raised and widened rectangular-section frame that fully enhances torsion and bending resistance during lifting operations. Adopts a 375-horsepower engine, a 10-speed transmission with a synchronizer, and heavy-duty load-bearing axles. G-class chassis with excellent passing performance, featuring a maximum climbing gradient of 47% and a fuel consumption of 40L per 100km. Name Plate Tire Cab Winch
US$ 1
Sany 55T,550T5, 46-meter boom length, 10.5-ton counterweight.good condition,no any accident,EXW price 77000 USD
US$ 77,000
UCC SANY 2019 STC550T6 55Tons 6 Section Used Truck Crane Superior Lifting Capacity Six-section main boom with a large cross-section and oval shape. The fully extended length of the main boom is 52m, the maximum lifting height is 68m, and it has an excellent lifting height capacity at the 80t class. With a transverse outrigger span of 7.4m and a counterweight of 10.5t, its lifting performance leads the industry by more than 20%. Super Strong Chassis Performance A brand-new chassis with a width of 2.8m, equipped with a raised and widened rectangular-section frame that fully enhances torsion and bending resistance during lifting operations. Adopts a 375-horsepower engine, a 10-speed transmission with a synchronizer, and heavy-duty load-bearing axles. G-class chassis with excellent passing performance, featuring a maximum climbing gradient of 47% and a fuel consumption of 40L per 100km. Cab Tire Cab Turntable
US$ 1
UCC 2019 SANY STC550T5 50 Tons Used Truck Crane Machinery Equipment Chassis Designed and manufactured by SANY, utilizing a new high-strength structural chassis. The chassis is heightened and widened, providing a 25% increase in rigidity compared to channel-type chassis, significantly enhancing load-bearing capacity. Outriggers H-type outriggers with 4-point support. Longitudinal and transverse span: 6.13m x 7.4m, offering easy operation and strong stability. Manufactured from fine-grained high-strength steel plates. Primary and secondary outriggers feature fully hydraulic lateral extension. Vertical outrigger cylinders are equipped with bidirectional hydraulic locks for safety protection. Engine Type: In-line six-cylinder, water-cooled, turbocharged and intercooled diesel engine. Environmental Compliance: Meets China National V emission standards. Fuel Tank Effective Capacity: 350L. Transmission System Transmission: 10-speed manual transmission with synchronizer, featuring a wide ratio range suitable for both low-speed off-road climbing and high-speed travel. Drive Shaft: Optimized drive shaft layout ensures smooth and reliable power transmission. Utilizes face tooth coupling for maximum torque transmission capacity. Work Hours Load Chart Cab Name Plate
US$ 1
UCC 2018 STC550T SANY Used 55 Tons Truck Crane Construction Equipment Compact Design: The three-axle cranes are capable of accessing various urban or small jobsites, featuring high flexibility and fast transferring.Double Pump Intelligent Flow Distribution System: The electro-hydraulic control system realizes effective flow distribution, featuring quick response to combined motions and small impact shock, energy saving, and environmentally friendly. Precise control: Excellent inching performance, min. The stable speed of a single rope is 1.2m/min and min. The sound speed of slewing is 0.1°/s, realizing precise lifting of mm level. Integrated slewing buffer control: boost buffer, sequential brake, and free swing technology-smooth start and stop.High-performance Chassis: Innovative structural frame verified by 200,000 cycling fatigue tests to ensure high reliability.Smart Contral System:CAN BUS system: Controllers, displays, meters, I/O modules, sensors, etc., are integrated into CAN Bus networking and fast-responsive. Fault diagnosis system: Operating device with intelligent controller, body with BCM module, accurately locating the fault point, making the maintenance convenient. · The load moment indicator system protects against overloading, over-release, and over-winding.Precision and Economy: Valves and other hydraulic components realize better inching motion performance. Load-sensing and constant-power techniques optimize fuel efficiency.
US$ 1
UCC Used 2020 STC800E5 SANY 80 Tons Truck Crane Multi-Section Boom For Sale More excellent performance• The optimizing layout of the machine makes the stress of the main bearing carriers more reasonable, and the lifting performance is higher than the products with the same tonnage.• Apply the mature jib technique which integrates plug-in boom head, embedded boom block, and special telescoping mechanism,which makes the jib more stable and reliable.• Optimize the stress design. Adopt the box-type outriggers which have larger span, stronger rigidity, and better stability. Engine Winch Screen Nameplate
US$ 1
UCC Hot Sale 2020 SAC2200T SANY Used 220 Tons All-terrain Truck Crane For Sale Excellent performanceThe all terrain crane is a high-performance product that combines the characteristics of both a truck crane and an off-road crane. It can not only transfer quickly and travel long distances like a car crane, but also meet the requirements of working on narrow, rugged or muddy areas, with fast driving speed, multi axle drive, all wheel steering, three steering modes, large ground clearance, and high climbing ability. It is a highly promising product. But the price is high, and there is a high demand for usage and maintenance level.
US$ 1
November 2020 SANY 500E5, 9.8-ton counterweight with lifting jack, original paint, no accidents.
US$ 72,000
2013 Zoomlion 130-ton crane, 6-section boom (57.5m length), 3-section jib, 45-ton counterweight, dual Mercedes-Benz engines (for carrier and superstructure), equipped with an auxiliary winch, three hook blocks (90t, 55t, and 10t), and four outrigger pads (two 1.8m pads and two 1.6m pads).no welding,no reinforcement,good condition,no any accident,EXW price 76000 USD
US$ 76,000